Enterasys Networks 1G58x-09 - Manual (Page 265)

SNMP Command Set
Configuring SNMP Target Addresses
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 5-43
Example
This example shows how to display SNMP target address information:
Table 5-10 shows a detailed explanation of the command output.
Matrix>show snmp targetaddr
--- SNMP targetaddr information ---
Target Address Name = 1
Tag List = Console
IP Address = 127.0.0.1
UDP Port# = 0
Target Mask = 255.255.255.255
Timeout = 100
Retry count = 3
Parameters = v1ExampleParams
Storage type = nonVolatile
Row status = active
Target Address Name = 2
Tag List = Console
IP Address = 127.0.0.1
UDP Port# = 0
Target Mask = 255.255.255.255
Timeout = 100
Retry count = 3
Parameters = v2ExampleParams
Storage type = nonVolatile
Row status = active
Table 5-10 show snmp targetaddr Output Details
Output What It Displays...
Target Address Name Unique identifier in the snmpTargetAddressTable .
Tag List Tags a location to the target address as a place to
send notifications.
IP Address Target IP address.
UDP Port# Number of the UDP port of the target host to use.
Target Mask Target IP address mask.
Timeout Timeout setting for the target address.
Retry count Retry setting for the target address.