Enterasys Networks 1G58x-09 - Manual (Page 493)

Logging and Network Management Command Set
Monitoring Switch Network Events and Status
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-23
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to use the show eventlog command:
11.2.2.2 clear eventlog
Use this command to delete all entries from the system event log.
clear eventlog
Syntax Description
None.
Command Defaults
None.
Command Type
Switch Command.
Command Mode
Read-Write.
Example
This example shows how to clear the event log:
Matrix>show eventlog
07/01/2001 16:57:28- (Info ) system started
07/02/2001 08:29:13- (Info ) system started
07/04/2001 09:21:28- (Info ) system started
Matrix>clear eventlog