Enterasys Networks 1G58x-09 - Manual (Page 568)

IP Configuration Command Set
Reviewing and Saving the Routing Configuration
12-12 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Syntax Description
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Command Defaults
If no parameters are specified, the running configuration will be displayed to the
terminal session.
Example
This example shows how to display the router-specific configuration to the terminal:
erase (Optional) Deletes the router-specific file.
file (Optional) Saves the router-specific configuration to
NVRAM.
filename
config_file (Optional) Saves the router-specific configuration to a file.
terminal (Optional) Displays the current router-specific
configuration to the terminal session.
Matrix>Router#write terminal
Enable
Config t
interface vlan 1
iP Address 182.127.63.1 255.255.255.0
no shutdown
interface vlan 2
iP Address 182.127.62.1 255.255.255.0
no shutdown
exit
router rip
network 182.127.0.0
exit
disable
exit