Enterasys Networks 1G58x-09 - Manual (Page 347)

VLAN Configuration Command Set
Reviewing Existing VLANs
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 7-5
in VLAN 7 port egress list and are configured to transmit frames tagged as VLAN 7 frames. There
are no VLAN 7 forbidden ports:
This example shows how to display detailed attributes of all VLANs known to the device. In this
case, 17 VLANs have been created, either statically or dynamically through GVRP (GARP VLAN
Registration Protocol). For more information on creating static VLANs, refer to
Section 7.3.2.1 .
For more information on configuring GVRP, refer to Section 7.3.8 . VLANs can also be
automatically created when dynamic egress is enabled as described in Section 7.3.4.6 :
Matrix>show vlan 7
VLAN: 7 Name: green Status: enabled
Egress Ports
fe.0.5-10, fe.0.12, fe.0.30
Forbidden Egress Ports
None
Untagged Ports
None
Matrix>show vlan detail
Number of vlans: 17
Number of vlans deleted: 172
Vlan Type Status
-----------------------------------------
1 Static enabled
10 GVRP enabled
11 GVRP enabled
12 GVRP enabled
13 GVRP enabled
14 GVRP enabled
15 GVRP enabled
16 GVRP enabled
17 GVRP enabled
18 GVRP enabled
19 GVRP enabled
20 GVRP enabled
510 GVRP enabled
520 GVRP enabled
530 GVRP enabled
4000 GVRP enabled
4094 GVRP enabled