Enterasys Networks 1G58x-09 - Manual (Page 489)

Logging and Network Management Command Set
Configuring System Logging
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-19
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the severity level for the Secure Shell application to 4 so that error
conditions will be logged for that application:
Radius RADIUS client/server
Trunking Port trunking
MacAuth MAC authentication
Alias Node and alias
SNMP Simple Network Management Protocol
sntp Simple Network Time Protocol
CLI Command Line Interface
Telnet Telnet server and client
SysDownload System download
PortMirroring Port mirroring (redirect)
Webview Enterasys’ WebView management application
Matrix>set logging application SSH 4
Table 11-3 Mnemonic Values for Logging Applications (Continued)
Mnemonic Application