Enterasys Networks 1G58x-09 - Manual (Page 755)

Security Configuration Command Set
Configuring Port Web Authentication (PWA)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-73
14.3.5.10set pwa guestname
Use this command to set a guest user name for PWA enhanced mode networking. When enhanced
mode is enabled (as described in
Section 14.3.5.9 ), PWA will use this name to grant network access
to guests without established login names and passwords.
set pwa guestname name
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the PWA guest user name to guestuser:
14.3.5.11set pwa guestpassword
Use this command to set the guest user password for PWA networking. When enhanced mode is
enabled, (as described in
Section 14.3.5.9 ) PWA will use this password and the guest user name to
grant network access to guests without established login names and passwords.
set pwa guestpassword
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
name Specifies a guest user name.
Matrix>set pwa guestname guestuser