Enterasys Networks 1G58x-09 - Manual (Page 606)

Process Overview: Routing Protocol Configuration
Configuring RIP
13-12 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Command Defaults
None.
Example
This example shows how to create a RIP authentication key chain called “password”:
13.1.1.10key
Use this command to identify a RIP authentication key on a key chain.
key key-id
Syntax Description
Command Syntax of the “no” Form
The “no” form of this command removes the key from the key chain:
no key key-id
Command Type
Router command.
Command Mode
Key chain configuration: Matrix>Router(config-keychain)#
Command Defaults
None.
Matrix>Router(config)#key chain password
NOTE: This release of the Matrix E1 supports only one key per key chain.
key-id Specifies an authentication number for a key. Valid number
are from 0 to 4294967295. Only one key is supported per
key chain in this Matrix E1 release.