Enterasys Networks 1G58x-09 - Manual (Page 112)

General Configuration Command Set
Managing Switch Configuration Files
3-64 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3.2.5.5 copy
Use this command to upload or download a configuration file.
copy source destination
The options for using this syntax are:
• copy filename1 filename2
• copy {filename device-config} tftp:[[[//url/directory/filename]
• copy tftp:[[[//url]/directory]/filename] {filename | device-config} [append]
Syntax Description
NOTES: The switch IP address, dip switch, and event log settings will not be affected
by the download of a configuration file from another Matrix E1 switch.
If the file being downloaded is a text configuration file, then commands from the file will
be set on the receiving device, including IP addresses.
source Specifies the source file to copy. Options are
device-config, a filename, or the URL of a TFTP server.
(See individual descriptions below.)
destination Specifies the destination where the file will be copied.
Options are device-config, a filename, or the URL of a
TFTP server. (See individual descriptions below.)
filename Specifies the source file to copy or the destination where
the file will be copied to the NVDRIVE: file system.
device-config Creates and uploads a text configuration file, or specifies
the destination for a text configuration file.
tftp:[[[//url/
directory/
filename Specifies the TFTP server IP address and directory where
the source or destination file is located, and the name of the
file being copied or overwritten.
append (Optional) Adds the CLI commands from the specified file
without resetting the device. This option is only valid when
the device-config keyword is used.