Enterasys Networks 1G58x-09 - Manual (Page 735)

Security Configuration Command Set
Configuring MAC Locking
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-53
14.3.4.8 set maclock move
Use this command to move all current first arrival MACs to static entries.
set maclock move port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to move all current first arrival MACs to static entries on Fast Ethernet
front panel port 3:
14.3.4.9 clear maclock static
Use this command to remove statically locked MACs from a port.
clear maclock static port-string
Syntax Description
Command Defaults
None.
port-string Specifies the port where all current first arrival MACs
will be moved to static entries. For a detailed description
of possible port-string values, refer to
Section 4.1.2 .
Matrix>set maclock move fe.0.3
port-string Specifies the port from which statically locked MACs
will be removed. For a detailed description of possible
port-string values, refer to
Section 4.1.2 .