Enterasys Networks 1G58x-09 - Manual (Page 656)

Process Overview: Routing Protocol Configuration
Configuring OSPF
13-62 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Syntax Description
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Command Defaults
None.
Example
This example shows how to reset OSPF process 1:
process-id Specifies the process ID, an internally used identification
number for each instance of the OSPF routing process run
on a router. Valid values are 1 to 65535.
Matrix>Router#clear ip ospf process 1