Enterasys Networks 1G58x-09 - Manual (Page 530)

Logging and Network Management Command Set
Configuring Simple Network Time Protocol (SNTP)
11-60 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11.2.4 Configuring Simple Network Time Protocol (SNTP)
Purpose
To configure the Simple Network Time Protocol (SNTP), which synchronizes device clocks in a
network. For other time-related commands, see
Section 3.2.2 , “ Setting Basic Device Properties ,”
on page 3-30 .
Commands
Commands to configure SNTP are listed below and described in the associated section as shown.
• show sntp ( Section 11.2.4.1 )
• set sntp client ( Section 11.2.4.2 )
• set sntp broadcastdelay ( Section 11.2.4.3 )
• set sntp poll-interval ( Section 11.2.4.4 )
• set sntp server ( Section 11.2.4.5 )
• clear sntp server ( Section 11.2.4.6 )
• set timezone ( Section 11.2.4.7 )
• clear timezone ( Section 11.2.4.8 )
11.2.4.1 show sntp
Use this command to display SNTP settings.
show sntp
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.