Enterasys Networks 1G58x-09 - Manual (Page 702)

Security Configuration Command Set
Configuring 802.1X Authentication
14-20 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Examples
This example shows how to display the EAPOL port control mode for Fast Ethernet front panel
port 1:
This example shows how to display the 802.1X quiet period settings for Fast Ethernet front panel
port 1:
14.3.2.3 set dot1x
Use this command to enable or disable 802.1X authentication.
set dot1x {enable | disable}
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to enable 802.1X:
Matrix>show dot1x auth-config authcontrolled-portcontrol fe.0.1
Port 1: Auth controlled port control: Auto
Matrix>show dot1x auth-config quietperiod fe.0.1
Port 1: Quiet period: 30
enable | disable Enables or disables 802.1X.
Matrix>set dot1x enable