Enterasys Networks 1G58x-09 - Manual (Page 560)

IP Configuration Command Set
Configuring Routing Interface Settings
12-4 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Syntax Description
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Command Defaults
If not specified, information for all interfaces will be displayed.
vlan vlan-id |
loopback
loopback-id (Optional) Displays interface information for a specific
VLAN or loopback. This interface must be configured for IP
routing as described in
Section 3.3.2 .