Enterasys Networks 1G58x-09 - Manual (Page 386)

VLAN Configuration Command Set
Enabling/Disabling GVRP (GARP VLAN Registration Protocol)
7-44 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
• set gvrp ( Section 7.3.8.3 )
• set garp timer ( Section 7.3.8.4 )
7.3.8.1 show gvrp
Use this command to display GVRP status.
show gvrp [port-string]
Syntax Description
Command Defaults
If port-string is not specified, GVRP status will be displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display GVRP status for Fast Ethernet front panel ports 1 though 10:
port-string (Optional) Displays GVRP configuration information for
specific port(s). For a detailed description of possible
port-string values, refer to
Section 4.1.2 .
Matrix>show gvrp fe.0.1-10
Global GVRP Configuration is enabled.
Port GVRP
Number Status
--------- ---------
fe.0.1 enabled
fe.0.2 enabled
fe.0.3 enabled
fe.0.4 enabled
fe.0.5 enabled
fe.0.6 enabled
fe.0.7 enabled
fe.0.8 enabled
fe.0.9 enabled
fe.0.10 enabled