Enterasys Networks 1G58x-09 - Manual (Page 323)

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 6-37
• clear spantree spanguardtimeout ( Section 6.2.2.19 )
• show spantree spanguardlock ( Section 6.2.2.20 )
• clear spantree spanguardlock ( Section 6.2.2.21 )
• show spantree spanguardtrapenable ( Section 6.2.2.22 )
• set spantree spanguardtrapenable ( Section 6.2.2.23 )
• clear spantree spanguardtrapenable ( Section 6.2.2.24 )
• show spantree adminpoint ( Section 6.2.2.25 )
• set spantree adminpoint ( Section 6.2.2.26 )
• clear spantree adminpoint ( Section 6.2.2.27 )
6.2.2.1 show spantree portadmin
Use this command to display the status of the Spanning Tree algorithm on one or more ports.
show spantree portadmin port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
port-string Specifies port(s) for which to display status. For a
detailed description of possible port-string values, refer
to
Section 4.1.2 .