Enterasys Networks 1G58x-09 User Manual
Page 402
Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
8-10
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Syntax Description
profile-index
Specifies a profile index number. Assigned to this
classification rule with the set policy profile command
(
). Valid values are 1 to 65535.
classify-index
Specifies a number of the classification rule. Valid values
are 1 to 65535.
vlan | cos
Specifies whether this rule will classify to a VLAN or
Class-of-Service.
NOTE: VLAN classification is available for
Ethernet II type (ether) and 802.3 SAP (llc)
frames. Untagged frames received with any of
the other VLAN classification protocols listed
below will be dropped and not forwarded.
classify-value
Specifies a Class-of-Service value or VLAN ID to
associate with the classification rule. Valid CoS values are
0 - 7. Valid VLAN ID values and associated actions are:
•
4095: permits these frames to forward on all VLANs.
•
0: denies and discards these frames for all VLANs.
•
1: classifies these frames the default VLAN.
•
2 - 4094: classifies these frames to the specified
VLAN.
ether
Classifies based on type field in Ethernet II packet.
ipbil
Classifies based on bilateral IP address.
ipdest
Classifies based on destination IP address.
ipproto
Classifies based on Protocol field in IP packet.
ipsource
Classifies based on source IP address.
iptos
Classifies based on Type of Service field in IP packet.
ipxbil
Classifies based on bilateral IPX address.
ipxbilsocket
Classifies based on bilateral IPX socket.
ipxclass
Classifies based on transmission control in IPX.
ipxdest
Classifies based on destination IPX address.
ipxdestsocket
Classifies based on destination IPX socket.