Enterasys Networks 1G58x-09 - Manual (Page 543)

Logging and Network Management Command Set
Configuring Node Aliases
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-73
11.2.5.6 clear nodealias config
Use this command to reset node alias state to enabled and clear the maximum entries value.
clear nodealias config
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the node alias configuration :
Matrix>clear nodealias config