Enterasys Networks 1G58x-09 - Manual (Page 423)

Port Priority and Classification Configuration Commands
Configuring Port Priority
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 9-5
9.3.1.1 show port priority
Use this command to display the 802.1p priority for one or more ports.
show port priority [port-string]
Syntax Description
Command Defaults
If port-string is not specified, port priority for all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the port priority for the Fast Ethernet expansion module 3, port
11.
In this case, the priority is 5:
9.3.1.2 set port priority
Use this command to set the 802.1D transmit queue priority (0 through 7) on each port. A port
receiving a frame without priority information in its tag header is assigned a priority according to
the priority setting on the port. For example, if the priority of a port is set to 5, the frames received
through that port without a priority indicated in their tag header are classified as a priority 5.
A frame with priority information in its tag header is transmitted according to that priority.
set port priority port-string priority
port-string (Optional) Displays priority information for specific
port(s). For a detailed description of possible port-string
values, refer to
Section 4.1.2 .
Matrix>show port priority fe.3.11
Port fe.3.11 has port priority of 5.