Enterasys Networks 1G58x-09 - Manual (Page 157)

Port Configuration Command Set
Reviewing Port Status
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 4-11
4.3.1.3 clear port counters
Use this command to clear port counter statistics for one or more ports.
clear port counters [port-string]
Syntax Description
Command Defaults
If port-string is not specified, counter statistics will be cleared for all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to clear all counter statistics for Fast Ethernet front port panel 42:
Table 4-3 show port counters Output Details
Output What It Displays...
Port Port designation. For a detailed description of possible
port-string values, refer to
Section 4.1.2 .
Bridge Port Spanning Tree bridge port designation.
MIB2 Interface
Counters MIB2 network traffic counts.
802.1Q Switch
Counters Counts of frames received and transmitted.
port-string (Optional) Clears counter statistics for specific port(s). For
a detailed description of possible port-string values, refer to
Section 4.1.2 .
Matrix>clear port counters fe.0.42