Enterasys Networks 1G58x-09 - Manual (Page 726)

Security Configuration Command Set
Configuring MAC Locking
14-44 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
• clear maclock autostatic ( Section 14.3.4.16 )
• set maclock trap ( Section 14.3.4.17 )
• clear maclock ( Section 14.3.4.18 )
14.3.4.1 show maclock
Use this command to display the status of MAC locking on one or more ports.
show maclock [port-string]
Syntax Description
Command Defaults
If port-string is not specified, MAC locking status will be displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
port-string (Optional) Displays MAC locking status for specified
port(s). For a detailed description of possible port-string
values, refer to
Section 4.1.2 .