Enterasys Networks 1G58x-09 - Manual (Page 618)

Process Overview: Routing Protocol Configuration
Configuring RIP
13-24 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Command Mode
Router configuration: Matrix>Router(config-router)#
Command Defaults
None.
Example
This example shows how to suppress the network 192.5.34.0 from being advertised in outgoing
routing updates:
13.1.1.22redistribute
Use this command to allow routing information discovered through non-RIP protocols to be
distributed in RIP update messages.
redistribute {connected | ospf process_id | static} [metric metric value]
[subnets]
Matrix>Router(config)#access-list 1 deny 192.5.34.0 0.0.0.255
Matrix>Router(config)#router rip
Matrix>Router(config-router)#distribute-list 1 out vlan