2 general configuration command set, 1 setting user accounts and passwords, 1 show system login – Enterasys Networks 1G58x-09 User Manual
Page 69: General configuration command set -21 3.2.1, Setting user accounts and passwords -21 3.2.1.1, Show system login -21, Accounts and passwords, Section 3.2.1
General Configuration Command Set
Setting User Accounts and Passwords
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3-21
3.2
GENERAL CONFIGURATION COMMAND SET
3.2.1
Setting User Accounts and Passwords
Purpose
To change the device’s default user login and password settings, and to add new user accounts and
passwords.
Commands
The commands needed to set user accounts and passwords are listed below and described in the
associated section as shown.
•
)
•
set system login (
)
•
clear system login (
•
set password (
)
•
set system password length (
)
•
set system password aging (
•
set system password history (
)
•
set system lockout attempts (
•
set system lockout (
3.2.1.1
show system login
Use this command to display user login account information.
show system login
Syntax Description
None.
Command Defaults
None.