Enterasys Networks 1G58x-09 - Manual (Page 201)

Port Configuration Command Set
Configuring Static Port Trunking
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 4-55
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to create a trunk named “blue”:
4.3.11.4 clear trunk
Use this command to delete a trunk when the device is set to port trunking mode.
clear trunk trunk_name
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to delete the “green” trunk from the device :
Matrix>set trunk blue create
trunk_name Specifies the name of the trunk to be deleted.
Matrix>clear trunk green