Enterasys Networks 1G58x-09 - Manual (Page 260)

SNMP Command Set
Configuring SNMP Target Parameters
5-38 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to display SNMP target parameters information:
Table 5-9 shows a detailed explanation of the command output.
Matrix>show snmp targetparams
--- SNMP TargetParams information ---
Target Parameter Name = v1ExampleParams
Security Name = public
Message Proc. Model = SNMPv1
Security Level = noAuthNoPriv
Storage type = nonVolatile
Row status = active
Target Parameter Name = v2ExampleParams
Security Name = public
Message Proc. Model = SNMPv2
Security Level = noAuthNoPriv
Storage type = nonVolatile
Row status = active
Target Parameter Name = v3ExampleParams
Security Name = CharlieDChief
Message Proc. Model = v3
Security Level = authNoPriv
Storage type = nonVolatile
Row status = active
Table 5-9 show snmp targetparams Output Details
Output What It Displays...
Target Parameter Name Unique identifier for the parameter in the SNMP
target parameters table. Maximum length is 32
bytes.
Security Name Security string definition.
Message Proc. Model SNMP version.