Enterasys Networks 1G58x-09 - Manual (Page 380)

VLAN Configuration Command Set
Setting the Host VLAN
7-38 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
7.3.6 Setting the Host VLAN
Purpose
To configure a host VLAN that only select devices are allowed to access. This secures the host port
for management-only tasks.
Commands
The commands needed to configure host VLANs are listed below and described in the associated
section as shown.
• show host vlan ( Section 7.3.6.1 )
• set port vlan host ( Section 7.3.6.2 )
• clear host vlan ( Section 7.3.6.3 )
7.3.6.1 show host vlan
Use this command to display the current host VLAN.
show host vlan
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
NOTE: The host port is the management entity of the device.