Enterasys Networks 1G58x-09 - Manual (Page 714)

Security Configuration Command Set
Configuring MAC Authentication
14-32 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to display MAC authentication information for Fast Ethernet front panel
ports 1 through 15:
Table 14-3 provides an explanation of the command output.
Matrix>show macauthentication fe.0.1-15
MAC authentication - disabled
MAC user password - NOPASSWORD
Port username significant bits - 48
Port Port Quiet Reauth Auth Auth Reauthentications
State Period Period Allowed Allocated
------- -------- ---------- ---------- -------- --------- -----------------
fe.0.1 disabled 30 3600 1 1 disabled
fe.0.2 disabled 30 3600 1 1 disabled
fe.0.3 disabled 30 3600 1 1 disabled
fe.0.4 disabled 30 3600 1 1 disabled
fe.0.5 disabled 30 3600 1 1 disabled
fe.0.6 disabled 30 3600 1 1 disabled
fe.0.7 disabled 30 3600 1 1 disabled
fe.0.8 disabled 30 3600 1 1 disabled
fe.0.9 disabled 30 3600 1 1 disabled
fe.0.10 disabled 30 3600 1 1 disabled
fe.0.11 disabled 30 3600 1 1 disabled
fe.0.12 disabled 30 3600 1 1 disabled
fe.0.13 disabled 30 3600 1 1 disabled
fe.0.14 disabled 30 3600 1 1 disabled
fe.0.15 disabled 30 3600 1 1 disabled
Table 14-3 show macauthentication Output Details
Output What It Displays...
MAC
authentication Whether MAC authentication is globally enabled or
disabled. Set using the set macauthentication command as
described in
Section 14.3.3.3 .
MAC user
password User password associated with MAC authentication on the
device. Set using the set macauthentication password
command as described in
Section 14.3.3.4 .