Enterasys Networks 1G58x-09 - Manual (Page 70)

General Configuration Command Set
Setting User Accounts and Passwords
3-22 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Command Type
Switch command.
Command Mode
Super User.
Example
This example shows how to display login account information. In this case, device defaults have
not been changed:
Table 3-5 provides an explanation of the command output.
Matrix>show system login
Password history size: 0
Password aging : disabled
Password length : 0
Lockout time : 15
Lockout attempts : 3
User Privileges Status
-------------------------------------
admin su enabled
rw rw enabled
ro ro enabled
Table 3-4 show system login Output Details
Output What It Displays...
Password history
size Number of user login passwords that will be checked for
duplication when the set password command is executed.
Configured with the set system password history command
(
Section 3.2.1.7 ).
Password aging Number of days user passwords will remain valid before
aging out. Configured with the set system password aging
command (
Section 3.2.1.6 ).
Password length Minimum number of characters required for a login
password. Configured with the set system password length
command (
Section 3.2.1.5 ).