Enterasys Networks 1G58x-09 - Manual (Page 248)

SNMP Command Set
Configuring SNMP Users, Groups and Communities
5-26 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to allow the SNMPv1 “green” community access to the “netops” user
security policies:
5.2.2.12 clear snmp community
Use this command to remove a relationship between an SNMP v1 or v2 community name and an
SNMPv3 access policy.
clear snmp community name
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to remove the “green” community’s access to the “netops” user security
policy:
Matrix>set snmp community green netops
name Specifies the SNMPv1 or v2 community name for which
the SNMPv3 relationship will be cleared.
Matrix>clear snmp community green