Enterasys Networks 1G58x-09 - Manual (Page 243)

SNMP Command Set
Configuring SNMP Users, Groups and Communities
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 5-21
5.2.2.6 clear snmp group
Use this command to clear SNMP group settings globally or for a specific SNMP group or user.
clear snmp group groupname user [security-model {v1 | v2 | v3}]
Syntax Description
Command Defaults
• If groupname is not specified, settings will be cleared for all SNMP groups.
• If user is not specified, settings will be cleared for all SNMP users.
• If security-model is not specified, settings will be cleared for all SNMP
versions.
• If no parameters are specified, all SNMP group settings will be cleared.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear all settings assigned to the “public” user within the SNMP group
“anyone”:
groupname Specifies the SNMP group to be cleared.
user Specifies the SNMP user to be cleared.
security-model v1 |
v2 | v3 (Optional) Clears the settings associated with a specific
security model.
Matrix>clear snmp group anyone public