Enterasys Networks 1G58x-09 User Manual
Page 748
Security Configuration Command Set
Configuring Port Web Authentication (PWA)
14-66
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
PWA Name
Services
Status of DNS and WINS clients. Default state of disabled
can be changed using the set pwa nameservices command
as described in
.
PWA Protocol
Whether PWA protocol is CHAP or PAP. Default setting of
PAP can be changed using the set pwa protocol command as
described in
PWA Enhanced
Mode
Whether PWA enhanced mode is enabled or disabled.
Default state of disabled can be changed using the set pwa
enhancedmode command as described in
PWA Logo
Whether the PWA logo will be displayed or hidden at user
login. Default state of enabled (displayed) can be changed
using the set pwa displaylogo command as described in
.
PWA Guest Name Guest user name for PWA enhanced mode networking.
Default value of “guest” can be changed using the set pwa
guestname command as described in
PWA Guest
Password
Guest user’s password. Default value of an empty string can
be changed using the set pwa guestpassword command as
described in
.
PWA Guest
Network Status
Whether PWA guest user status is disabled or enabled with
RADIUS or no authentication. Default state of disabled can
be changed using the set pwa gueststatus command as
described in
.
PWA Refresh
Time
Interval in seconds at which the PWA screen will refresh.
Default setting of 30 can be changed using the set pwa
refreshtime command as described in
.
Port
PWA port designation.
Mode
PWA port control mode. Default setting of force authorized
can be changed using the set pwa portcontrol command as
described in
.
Auth Status
Whether or not the port state is disconnected, authenticating
authenticated, or held (authentication has failed).
Table 14-7
show pwa Output Details (Continued)
Output
What It Displays...