Lenze 9400 - Manual (Page 905)

Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
905
14 Parameter reference
14.2 Parameter list | C02902
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C02902
C02903
C02905
Parameter | Name:
C02902 | Timestamp
Data type: UNSIGNED_32
Index: 21673
d
= 54A9
h
From software version V3.0
 Basic function " Cam data management "
Display range (min. value | unit | max. value)
0 4294967295
Subcodes Info
C02902/1 Time stamp of the cam data in the controller
C02902/2 Time stamp of the cam data which are currently being
processed in the controller.
C02902/3 Time stamp of the cam data in the controller which have
already been converted into the internal format.
C02902/4 Time stamp of the cam data in the memory module
 Read access  Write access  CINH  PLC STOP  No transfer Scaling factor: 1
Parameter | Name:
C02903 | GUID
Data type: OCTET_STRING
Index: 21672
d
= 54A8
h
From software version V3.0
 Basic function " Cam data management "
Display range (min. value | unit | max. value)
Subcodes Info
C02903/1 GUID of the cam data in the controller
C02903/2 GUID of the cam data which are currently being
processed in the controller.
C02903/3 GUID of the cam data in the controller which have
already been converted into the internal format.
C02903/4 GUID of the cam data in the memory module
 Read access  Write access  CINH  PLC STOP  No transfer Scaling factor: 1
Parameter | Name:
C02905 | Online Change Mode
Data type: UNSIGNED_32
Index: 21670
d
= 54A6
h
From software version V3.0
 Basic function "Cam data management": Online change mode
Selection list (Lenze setting printed in bold)
10 Manual activation
15 Automatic activation
16 Automatic activation with controller
inhibit
 Read access  Write access  CINH  PLC STOP  No transfer Scaling factor: 1