Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 100)

3.12 GLP manager
88
PC Control / Touch Control
With Touch Control (see example) the test is very comprehensive. The
result of each test is shown in green if no error has occurred. If a result
is shown in red then an error occurred when the corresponding test
was carried out. Switch the system off and then on again. If the error
still occurs pleased consult Metrohm Service.
3.12.2 Test tools
You can create a list of test tools to be used in the tests in the GLP
manager.
The list already contains definitions of some test tools.
You can add and edit new test tools with [New]. Test tools can be
removed from the list with [Delete]. The dialog for entering the data for
the new tool is opened with [Edit]. You can enter a name and
comment for each test tool.