Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 262)

4.5 Calculations
250
PC Control / Touch Control
Variable Description Method command
MIT Initial temperature (temperature before
start conditions are processed)
DET, MET, SET,
KFT, STAT, MEAS,
DOS
MSA Start volume which is added according to
the start volume given in the start condi-
tions.
DET, MET
MSP Start volume which is added according to
the start measured value given in the start
conditions.
DET, MET
MSS Start volume which is added according to
the start slope given in the start conditions.
DET, MET
MSV Start volume for all start conditions (start
volume, start measured value and start
slope)
DET, MET, SET,
KFT, STAT
MSD Time for processing the start conditions DET, MET, SET,
KFT, STAT
MSM Start measured value (measured value af-
ter processing the start conditions)
DET, MET, SET,
KFT, STAT, DOS
MST Start temperature (temperature after proc-
essing the start conditions)
DET, MET, SET,
KFT, STAT, DOS
MCV End volume (total volume added at end of
titration)
DET, MET, SET,
KFT, STAT, MEAS
Conc, DOS
MCD Total duration of titration, measurement or
calibration (including start conditions)
DET, MET, SET,
KFT, STAT, MEAS,
DOS, CAL
MTM Method of temperature measurement
(Pt1000, NTC, manual); format = text
DET, MET, SET,
KFT, STAT, MEAS,
DOS
MDD Duration of net dosing (without filling
times, pause)
DOS
MDC Drift for drift correction SET, KFT
DDC Time for drift correction SET, KFT
MCM Final measured value (measured value at
end of the titration or measurement);
MEAS: corresponds to the measured con-
tent
DET, MET, SET,
KFT, STAT, MEAS,
DOS
MCT Final temperature (temperature at end of
the titration, measurement or calibration)
DET, MET, SET,
KFT, STAT, MEAS,
DOS, CAL