Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 180)

3.23 Print
168
PC Control / Touch Control
The selected report can be printed out with [Print]. With [Edit] the
parameters for the printout can be edited for some reports. The [Send]
button is only active when PC/LIMS report has been selected. [Method
reports] opens the list of reports for the current method. The list
containing all the reports about the system-specific data is opened with
[System reports].
If the [Print] fixed key is used then the reports will always be printed
out with the default settings. If you wish to print out a report with
different settings then you should define a REPORT command in the
method and adapt the parameters for the report (see Section 4.6). The
report defined in the method is printed out with [Print] [Report
sequence as defined in method].
With Touch Control you can also print out a screen dump of the
current dialog.
Touch the [Print] fixed key.
With [Print screen dump] you can activate the "print screen"
function. The next time that you touch the [Print] fixed key the
current screen contents will be printed out.
All upcoming print jobs will be cancelled with [Clear spooler].