Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 80)

3.10 Device manager
68
PC Control / Touch Control
3.10.6 Dosing Interface
The devices at the MSB connections are listed in a table for the Dosing
Interfaces that are connected. A stirrer and a dosing device are
connected to MSB 1, a dosing device is connected to MSB 2. If the
Dosing Interface is not connected, only the Device name and Comment
can be edited.
Select a connection or a device and open the corresponding
configuration dialog with [Properties].
The Program version and Serial number are shown for the Dosing
Interfaces connected.
For the MSB connections you can define when the request to carry
out a preparation function (PREP command) for the connected dosing
devices is to be displayed. The preparation of the exchange or dosing
unit is described in Section 3.24.2. For a description of the settings
please consult the online help.
The Stirrer type and Serial number are shown for the connected
stirrers.
The Dosing device type and the Serial number (for type 8xx dosing
devices only) are shown for the connected dosing devices.
3.10.7 Printer (Touch Control only)
A printer can only be configured for the Touch Control. When a
printer is connected it is automatically entered in the device list with
default parameters. Printer models which can be currently connected
can be found on the Internet under www.titrando.com.
Select the printer type.
Select the paper format (DIN format A4 or US format Letter).
Deactivate the Color checkbox if your printout is to be black/white
(not for HP LaserJet).
Deactivate the checkbox Compression in case of faulty reports. The
compression enables a faster data transfer to the printer.