Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 40)

3.7 System settings
28
PC Control / Touch Control
status "Saved" can be signed. The status of the method is given under
Method options/Properties (see Section 3.16.9).
If use only released methods is activated then the corresponding
user can only use methods that have been released, i.e. can only start
methods that have been signed at level 2. Review methods
(signature level 1) must be activated for a user to be entitled to
sign a method at level 1. The method then receives the status
"Reviewed". To be able to sign methods at level 2 Release methods
(signature level 2) must be activated. A method can only be signed
at level 2 when it has already been signed at level 1. The same user can
sign different methods either at level 1 or at level 2, if both checkboxes
Review methods and Release Methods are activated but not the same
method at the same time at level 1 and at level 2. When the user has
signed the method at level 2 it receives the status "Released". If Delete
signatures has been activated for a user then the user is entitled to
delete signatures. However, this is possible for methods that have been
signed at level 2. All the signatures are deleted and the method
receives the status "Saved".
The methods can be signed under Method options/Properties. The
procedure is described in Section 3.16.3.
By clicking on [Signature determination] you can access the edit
dialog for assigning the rights for using and signing determinations.
These settings are only effective when login and password is used.