Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 97)

3 Operation
PC Control / Touch Control
85
Touch Control:
Insert the card on which you want to make your safety copy in Card
slot 1 or 2 of the Touch Control.
PC Control:
Select the directory or drive on which you want to make your safety
copy under File/Preferences/Paths.
You can now open the file manager and start the backup.
Open the Card 1 or Card 2 memory location in the file manager.
Start data storage with [Backup] and answer the query “Do you
want to start the backup?“ with [Yes].
Only one backup can be stored on each card. If you try to create a new
backup on a card which already contains an older backup then this first
backup will be overwritten.
You can load the backup data into your system with the Restore
function. During the backup all your data is saved and, in the restore
function, you can select individual data blocks to be loaded from the
safety copy.
Note!
During restoring all the methods in the internal memory will be
deleted.
Backups are not backwardly compatible, i.e. backups of the latest
version cannot be restored with earlier versions.
Open the Card 1 or Card 2 memory location in the file manager
With [Restore] you can open the dialog for selecting the individual
data blocks.
The following data blocks can be loaded individually:
• Methods (from the internal memory): all method stored in the
internal memory as a file.
• Sample data silo: current sample data silo.
• Result silo: current result silo.