Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 91)

3 Operation
PC Control / Touch Control
79
Note!
In PC Control the file groups correspond to folders. Card 1 and
Card 2 each have only one level for groups and folders. The file
names must be unambiguous for all groups (folders) in a memory
location. You should only manage the PC Control files with the file
manager of the PC Control software. If you use Windows Explorer for
this then there is the risk that you might no longer find the files in PC
Control as the folder structure is not compatible.
With PC Control if you store files or a backup in the folders selected
for Card 1 or Card 2 then the following Folder structure will be created
automatically:
Fig. 3.10: PC Control: Folder structure for Card 1and Card 2
All the files which belong to a backup are stored in the Backup folder. All
the files which can be seen in the file manager of the PC Control under
Card 1 and Card 2 are stored in groups (subfolders) in the Files
folder. The subfolder (group) Examples is present in the standard folder
for Card 1 (see above). The example files are stored in this folder. The
Main Group folder is created as soon as a file is stored without entering
a new group. The pc_lims_report folder is created when you store a
PC/LIMS report as a file without entering a new group. The folders or
groups respectively where the PC/LIMS reports are saved are not
visible in the file manager. The folder PDF_report is generated as soon
as a report is saved as a PDF file without changing the path in the
menu File/Printer.
All methods which are stored in the internal memory can only be
exchanged by using the file manager of the PC Control software. File
transfers in the file manager are documented in the audit trail (see
Section 3.7.8).