Metrohm 840 PC Control 5.0 / Touch Control User Manual
Page 90
3.11 File manager
78
PC Control / Touch Control
You can select the memory location to be used for the files. [Card 1]
and [Card 2] are inactive when they cannot be accessed. With Touch
Control the cards must be inserted before you open the file manager.
[Shared memory] is only visible if an external file system is configured
(requires 847 USB Lab Link, see Section 3.10.11). If only the internal
memory can be accessed then the dialog System/File manager will be
skipped.
With the Touch Control the card slots for the PCMCIA cards are
located on the rear of the instrument (see Fig. 2.2: Rear view of the
Touch Control).
With PC Control you can define, on the Paths tab, directories for
Card 1 and Card 2 in the menu File/Preferences. These may be
directories on a hard disk, a network drive or any removable storage
medium. It must be possible to access the drive when the path is being
defined.
The example files (Examples) are stored in the folder for Card 1.