Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 159)

3 Operation
PC Control / Touch Control
147
two further columns can be shown. The columns to be shown is
defined under Sample data silo/Properties (see p.
1
149).
Note!
Sample data silo files can be exchanged between PC Control and
Touch Control as their contents are identical.
With [Edit] you can open the dialog in which the data for the selected
line is to be entered. [Delete] is used to delete the selected silo line.
With [Insert line] you can insert an empty silo line in front of the
selected silo line.
The sample data is entered and processed line by line in ascending
order. The "active" line which is currently being processed (current
sample) has a yellow background with PC Control; with Touch Control it
is indicated by the text being shown in green.
The input of the individual sample data (Identification 1, Identification 2,
value and unit for the sample size) and the method is in principle the
same for PC Control and Touch Control. In PC Control the data is
entered directly into the table, in Touch Control a new dialog is opened
for editing the silo line.
With Touch Control open the edit dialog for the selected silo line
with [Edit]. If you want to fill an empty sample data silo then this is
the first empty silo line. In the first line you can see which line you
are currently editing. The new line will only be saved when the entry
is confirmed. As long as the line has not been saved New sample
will be shown under the input field for the method name. In the edit
dialog for the active line which is currently being processed Current
sample will be shown in the same place. If several silo lines are
already present you can use the [+] and [–] buttons to switch
between the edit dialogs for the individual lines without having to
return to the table.