Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 38)

3.7 System settings
26
PC Control / Touch Control
method], [Control], [Edit parameter] and [Results]). In order for
the button to be active the corresponding checkbox must be activated
above.
Open the dialog in which you wish to disable buttons and
deactivate the checkboxes for the buttons that are to be disabled
for routine dialog.
You can also disable buttons in several subdialogs. These are indented
so that you can see which buttons belong to which dialog.
3.7.5 User administration
You can draw up a system-specific list of users who can operate the
titration system. You can use this list in two different ways: if you work
with login, i.e. if each user must log into the system before starting
work, then only those users entered in the list can log in. The user who
is currently logged in is shown in the main dialog and cannot be edited.
If you work without login then in the main dialog you can select the user
from those entered in the list and document the user of the titration
system in this way. The user name is printed out in all reports
containing determination data and stored in the determination file. Each
file always contains the name of the user who created it and the name
of the last user to edit it.
The name of the user, the dialog that the user can use to operate the
system and the status of the user are shown in the user list. If you work
with login then this dialog is only accessible to users with administrator
rights.
Open the dialog System settings/User administration.
The user list is initially empty.
Use [New] to define all the users who are allowed to operate the
system.
The dialog in which the user data can be entered is opened
automatically with [New]. For an existing user this dialog can be
opened with [Edit]. Existing users can be removed from the list with
[Delete].