Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 27)

3 Operation
PC Control / Touch Control
15
3.3.2 Controls of the Touch Control and PC Control
Both the Touch Control and the PC Control software systems have
changing controls within the dialog window and fixed keys outside the
dialog window which are accessible at all times. The following table lists
the functions of all the controls:
Fixed keys
Touch Control PC Control Fixed key function
Opens the context-sensitive online help
function (see Section 3.3.3).
Opens the print dialog for the manual
printout of the reports (see Section 3.23).
Opens the dialog for the manual operation of
the titration system (see Section 3.24). With
the PC Control a separate dialog window is
opened.
Stops the determination sequence. The
command which is currently being
processed will be stopped immediately and
the results page will be shown (see
Section 3.20.3). The following commands
(e. g. calculations, REPORT commands) will
not be carried out.
Starts the current method; this will then be
processed (see Section 3.20).
Switches to main dialog.
Switches to previous dialog.
Note!
The settings made in a dialog window with PC Control will only be
stored when the dialog is exited with [Back] or [Home].