Metrohm 840 PC Control 5.0 / Touch Control User Manual
Page 121
3
Operation
PC Control / Touch Control
109
The individual templates are described on the following pages. The
commands in the method templates have standard parameters. These
standard parameters are suitable for most titrations.
Note!
If you would like to test a
new titration method then select the
Dynamic titration pH or U template. Dynamic titration is suitable for
practically all standard applications and you only have to adapt
individual parameters in special cases.
No results have been defined yet in the calculations (see Section 4.5.1).
Select a method template from the list and load it with [Load
template] or load a method template in which no sequence of
commands has yet been defined with [Empty method]. When the
file has been loaded the program will jump automatically to the
main dialog. You can edit the method with [Edit parameters] (see
Section 3.16). This method has the name New method. You can
change this name when you save the method (see Section 3.16.11).