Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 79)

3 Operation
PC Control / Touch Control
67
Open the list with the available racks with [Rack tables].
Select the desired rack and press [Edit].
Press [Adjust rack].
Press [Start] (not the green <START> key).
The rack is rotated so that rack position 1 is positioned in front of
the tower. If a robotic arm is installed, it is swung to rack position 1.
The lift then moves to the work position.
The position of the lift can now be corrected with the arrow keys [u]
and [v].
Now use the [s] and [t] keys to turn the rack so that the robotic
arm or the center of the titration head is positioned exactly above
the center of rack position 1.
The adjustment is accepted with [OK]. The lift is moved to the
upper stop position.