Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 19)

2 Installation
PC Control / Touch Control
7
Fig. 2.2: Rear view of the Touch Control
1 Protective cover for card slots
Must be closed during operation to
protect the electronics from splashes.
14 Contrast controller for display
11 On/Off switch
Touch Control must be shut down
properly by switching it off before the
current supply is interrupted.
15 Connection cable
for connecting the Touch Control to the
Titrando ("Controller" connection).
12 Card slot 2
Accommodates one PCMCIA or
CompactFlash memory card.
16 Type plate
With device number and serial number
13 Card slot 1
Accommodates one PCMCIA or
CompactFlash memory card.