3 autostart – Metrohm 840 PC Control 5.0 / Touch Control User Manual
Page 140
3.17 Control
128
PC Control / Touch Control
3.17.3 Autostart
The autostart function is used for processing a sample series. If the
Autostart checkbox is activated then a new determination will be
started automatically when a determination has ended until the set
Number of autostarts has been reached. The number of autostarts
can also correspond to the number of samples defined in the sample
data silo (see Section 3.19.3).
If you deactivate the Autostart checkbox while a determination is
running then the current determination will be concluded but no new
START will take place. With [Reset Autostart] you can reset the
autostart counter, i.e. the number of autostarts which have already been
carried out in a series, to zero.
The current statistics status and the current autostart status will be
shown in the main dialog when these functions have been switched on.