Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 23)

3 Operation
PC Control / Touch Control
11
3.1.4 Entering text and numbers using Touch Control
Just touch an input field, e. g. User in the main dialog, to open the
Text editor.
In the text editor the name of the parameter is shown in front of the
input field.
Touch the required character. Apart from the capital letters which
first appear, there are also sets of characters with lower case letters,
numbers and mathematical signs as well as three blocks of special
characters. You can switch to the required set of characters with the
[a...z], [0...9] and [Special characters] buttons and
between the blocks of special characters with [More]. The
backspace button [⌫] deletes the character in front of the cursor.
[Delete entry] deletes the whole text. With the arrow buttons the
cursor can be positioned in the text.
Accept your entry with [OK] or [Back], or reject it with [Cancel].
In input fields for numerical values the number editor will open. The
required value is entered directly via the indicated keys. A stop is
automatically used as the decimal separator.
For example, touch the input field for the Stop volume in a titration
command.