Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 182)

3.23 Print
170
PC Control / Touch Control
The following reports can be printed out with the [Print] fixed key:
Report Contents
Print / More reports
Result report Determination properties,
sample data,
raw data, i.e. endpoints, final measured
values, results of evaluations (EVAL),
calculated results,
short statistics,
messages produced during the determination.
Curve The settings for the curve print-out are
adopted from the display.
List of measuring
points
List of measuring points
Calculations Details of the calculations carried out during
the determination sequence (details of every
result from the CALC commands, calculated
variables and calculated results with the
shown accuracy).
Used devices All the devices used in the determination
sequence as defined under More
determination data/Properties.
Variables All the determination data; depends on the
command.
Results
(current
determination)
Monitoring Details for the monitored quantities (STAT,
DOS only)
Statistics short Summary of the statistics calculations.
The number of results, the mean value,
absolute and relative standard deviation are
printed out for each result.
Statistics
Statistics overview Detailed statistics table, landscape format.
The sample data and all individual results are
printed out for each determination. The
number of results n, the mean value, absolute
and relative standard deviation are printed out
for each result.
Sample data Current sample data Context-sensitive only; from the main dialog.
The sample data is also printed out in the
result report.