Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 95)

3 Operation
PC Control / Touch Control
83
Select the memory location in which the file is to be stored under
Memory. Methods can be saved in the Internal memory, on Card 1
or Card 2 or a shared file system (requires 847 USB Lab Link, see
Section 3.10.11). All other files can only be stored on Card 1,
Card 2 or a shared file system.
You can arrange your files by storing them in different groups. Enter
the Group in which the file is to be saved. You can also select the
group from the list of existing file groups. If the file has already been
saved then the group in which it has been stored will be proposed.
The file names must be unambiguous for each memory location,
i.e. you cannot save a file in different groups with the same file
name.
Enter a File name. If the file has already been saved then the name
under which it has been stored will be proposed. The file is saved
with [Save]. The file will not be saved with [Cancel] and [Back].
3.11.5 Card 1 and Card 2
Not only methods but also determinations, sample data silo files and
results silo files can be stored on Card 1 and Card 2. Safety copies
(backups) can also be stored on the cards (see Section 3.11.6). The
type of file can be recognized by the file extension: mmth for
methods, mdtm for determinations, mslo for sample data silos and
mres for results silos.
If you are operating the Titrando system with Touch Control then
insert the CompactFlash card with the methods into Card slot 1.
Open the Card 1 memory location. The file groups on Card 1 are
shown.
On the cards you can also open lists of files with [Show all] or [Show
files] in exactly the same way as for the internal memory (see p. 80).
Open the dialog Card 1/Card info. Various information about the
card is shown in this dialog. Please note that with PC Control this
information refers to the drive defined under
File/Preferences/Paths, for example your computer hard disk.
You can switch on Write protection for the card by deactivating
the Card shared checkbox. If ‘enable’ is deactivated it is no longer
possible to save, delete and rename files on the card. With PC