Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 181)

3 Operation
PC Control / Touch Control
169
Open the dialog for the report configuration with [Report options]
in the Print dialog.
In the Report header the type, serial number and program version of the
software (Touch Control or PC Control), the device name which you can
enter in the device manager for Touch Control or PC Control, and the
printout date with time zone are printed out. You can also define your
own report header under System/Templates/Report header; this will
be printed out in front of the standard report header (see
Section 3.14.7).
Under Report header you can choose whether the report header is to
be printed out on every page, on the first page of the report only or not
at all. The Signature line gives you the possibility of signing the
report together with the date. You can choose whether the Signature
line is to be printed out on every page, on the first page of the report
only or not at all. If the Frame checkbox is activated then a frame will be
printed round each report page.
Hint!
You can make the sample identifications stand out in the report by
printing them in bold print. This is done when they are assigned to a
result. Therefore the CALC command must be extended accordingly
(see Section 4.5.1).